How to Replace the Clic 2 Bumper Bar
By Silver Cross | Published: 2026-10-25
Category: How-to Guides
A step-by-step guide to replacing the Silver Cross Clic 2 Bumper Bar, including tools needed, common mistakes, and maintenance tips for your stroller.
Quick answer
Replace the Silver Cross Clic 2 bumper bar by removing the old bar, aligning the new Ganache replacement part, and snapping it securely into place. Check alignment before use.
When to replace the bumper bar
The bumper bar on your Silver Cross Clic 2 stroller can wear out over time due to regular use, exposure to sunlight, or accidental impact. If you notice cracks, fading, or loose fit, it's time for a replacement.
A damaged bumper bar reduces protection for your stroller's frame and can affect the smooth operation of the fold mechanism. Replacing it promptly keeps your stroller safe and functional.
What you need
You only need the replacement bumper bar itself—no special tools required. The Silver Cross Clic 2 Bumper Bar in Ganache is a genuine spare part designed specifically for the Clic 2 Cobble model. It comes in a standard size and Ganache color finish.
Work on a clean, flat surface to avoid losing small parts. Have a soft cloth handy to wipe down the stroller frame before installation.
Step-by-step replacement guide
- Remove the old bumper bar: Locate the bumper bar at the front of the stroller. Grip it firmly and pull outward to release it from the clips. If it's stuck, use a flathead screwdriver wrapped in cloth to gently pry it free. Avoid twisting or excessive force. Common mistake: pulling at an angle can damage the clips. Pull straight outward.
- Clean the attachment points: Wipe the stroller frame where the bumper bar attaches using a damp cloth. Remove dirt or debris that could prevent a snug fit. Let the area dry completely.
- Align the new bumper bar: Hold the new Ganache bumper bar so the curved side faces outward. Line up the mounting tabs with the slots on the stroller frame. The bar should sit flush against the frame. Checkpoint: if the bar doesn't align easily, you may have it upside down or backward.
- Snap the bar into place: Press firmly on the center of the bumper bar until you hear a click on both sides. Run your hand along the bar to ensure it's fully seated and doesn't wobble. Common mistake: pressing only one side can leave the other loose. Apply even pressure.
- Test the installation: Gently tug on the bumper bar to confirm it's secure. Fold and unfold the stroller to ensure the bar doesn't interfere with the mechanism. If everything moves smoothly, you're done. If the bar feels loose, remove it and recheck alignment before snapping again.
Product facts
- Clic 2 Bumper Bar Ganache: This Clic 2 Bumper Bar in Ganache is a genuine Silver Cross replacement part specifically designed for the Clic 2 Cobble stroller. Using the correct genuine part ensures a perfect fit and maintains the stroller's warranty and safety standards.
Clic 2 Bumper Bar Ganache
