Back to Blog
Buying Guides 2026-11-16 Silver Cross 0 views

Motion 3 All Size 360: Extended Rear Facing Explained

Motion 3 All Size 360: Extended Rear Facing Explained

What extended rear facing means on the Motion 3 All Size 360, how the 40–145cm range shapes your years of use, and the trade-offs to weigh before buying.

What extended rear facing means on this seat

Extended rear facing is the practice of keeping a child in the rear-facing position beyond the first year. On the Motion 3 All Size 360, Silver Cross lists extended rear-facing up to 18kg. That figure is the deciding number for this seat: it tells you how long the rear-facing phase is designed to last, and it is separate from the seat's overall size range.

The seat covers birth to 12 years, or 40–145cm. Those two measurements answer different questions. The 40–145cm range describes the full span of the seat, while the 18kg limit describes the rear-facing phase specifically. If extended rear facing is your priority, plan around the 18kg figure first and treat the 40–145cm range as the longer story of how long the seat stays in your car.

The numbers that decide the rear-facing phase

Why the 18kg rear-facing limit matters more than the headline range

It is easy to read birth to 12 years and assume the seat does everything the same way throughout. It does not. The rear-facing phase has its own ceiling at 18kg, and that is the point where the seat's role changes. For a buying decision, the 18kg figure is the one to check against your child's growth and your own preference for how long to keep them rear facing.

The 40–145cm range is still useful, because it explains why this is described as an all size car seat: one seat covers the whole span from a newborn to a 12-year-old. But the two numbers should not be merged into a single promise. The seat is all size across 40–145cm, and extended rear facing applies up to 18kg within that span.

How the 360 rotation changes the daily routine

The rotating base is the feature you will notice every time you load or unload your child. Silver Cross lists EasyFit 360° rotating ISOFIX for quick, secure installation. That rotation is most valuable in the rear-facing phase, when lifting a child over the seat edge is awkward, and it stays useful as your child grows.

  • Loading in tight parking spaces: A seat that rotates toward the open door lets you fasten the harness from the side rather than reaching across the seat.
  • Switching between rear and forward facing: The 360° rotation is part of the EasyFit ISOFIX system, so the seat turns rather than being lifted in and out for each change.
  • Installation confidence: ISOFIX is the supplied installation method for this seat. The rotation is built into that base, not a separate add-on.

Motion 3 All Size 360: the practical package

The colour and fabric decision

The Natural Taupe version is the one described in the supplied catalog, and it uses premium multi-layered fabrics with soft waffle jersey and bamboo. Colour is a genuine buying consideration on a seat you will keep for years, because it sits in your car every day. The supplied information describes the fabric construction but does not list every colourway or confirm how each fabric behaves over time, so treat the fabric description as a comfort and feel point rather than a durability guarantee.

What you gain and what you give up with an all size seat

An all size car seat is a long-term purchase, and the trade-offs are worth stating plainly so you can decide whether the Motion 3 All Size 360 fits your family.

  • You gain one seat across 40–145cm: The seat is designed to cover birth to 12 years, so you are not buying a separate infant seat, toddler seat and booster in sequence.
  • You gain extended rear facing to 18kg: The rear-facing phase is a stated part of the design, not an afterthought, which suits parents who want to keep a child rear facing longer.
  • You give up a dedicated infant-seat carry: The supplied information does not describe a carry handle or a removable infant carrier, so this is a seat that stays in the car rather than moving with a sleeping baby.
  • You give up a simple one-stage fit: A seat that covers 40–145cm has more configurations to learn than a single-stage seat, so the first setup takes more attention.

What to confirm before you buy

The supplied information confirms the 40–145cm range, the 18kg extended rear-facing limit, the EasyFit 360° rotating ISOFIX installation and the included accessories. It does not list the seat's dimensions, its weight, or the specific vehicles it has been tested in. Before buying, check that your car has ISOFIX points and that the seat's footprint suits your rear bench, particularly if you often carry passengers in the back.

The seat is R129 approved and tested above and beyond regulation standards, according to the supplied catalog. That is a useful baseline, but it does not replace checking the fit in your own car. If you are choosing between this seat and a smaller dedicated option, the deciding question is simple: do you want one seat for 40–145cm with rear facing to 18kg, or a shorter-lived seat that is easier to handle in the early months?

Related Articles

Customer Service
Home
Products
Cart
Profile