Silver Cross

Nia Compact Travel System: 12-Piece Bundle Setup Guide

Nia Compact Travel System: 12-Piece Bundle Setup Guide

By Silver Cross | Published: 2026-11-01

Category: How-to Guides

Unbox the Silver Cross Nia 12-piece bundle in the right order, set up the one-hand fold carrycot and stroller, and fit the Glide Plus 360 car seat without missing a step.

Quick answer

Set up the Nia 12-piece bundle in this order: unbox and sort the pieces, unfold and lock the stroller frame, build and attach the carrycot, fit the Glide Plus 360 car seat, then add the accessory pack items. Do the carrycot and car seat checks before your first trip, not on the day you leave.

Why the order matters with a 12-piece bundle

The Nia bundle combines a stroller frame, a one-hand folding carrycot, a Glide Plus 360 car seat, and accessory pack items. If you attach accessories before the frame is fully open and locked, you can miss a click or misread a strap route. Build the core travel system first, then layer on the extras.

The carrycot is approved for aircraft cabin use in seat and carrycot mode, so it is worth learning its fold and release before travel day. Practise the one-hand fold at home while the stroller is empty.

What the Nia setup does not tell you

The catalog does not list a maximum child height for the carrycot, so check the carrycot itself for its own weight and fit guidance before use. The stroller is suitable from birth to 22kg (about 4 years), but that does not mean every child will fit the carrycot for the same period.

The Glide Plus 360 car seat is included, but installation instructions for your vehicle are specific to the car seat and your car. Follow the car seat's own manual for the vehicle belt or base route rather than relying on the stroller manual alone.

Step-by-step Nia 12-piece bundle setup

  1. Unbox and sort the 12 pieces: Lay out the stroller frame, carrycot, car seat, and accessory pack items on a clean floor. Match each piece to the bundle contents list before assembly. If a piece is missing, stop and contact the retailer before building; do not substitute parts.
  2. Open and lock the stroller frame: Unfold the frame until the lock engages, then push down on the frame joints to confirm it is secure. Attach the wheels if they are packed separately. A frame that rocks or will not stay open is not locked; re-check before adding the carrycot.
  3. Build and attach the carrycot: Open the carrycot fully and check the panoramic ventilation panels are clear. Click it onto the frame mounts, then tug gently upward to confirm it is seated. Practise the one-hand carrycot fold once empty so you know the release before your baby is inside.
  4. Fit the Glide Plus 360 car seat: Follow the car seat's own manual to install it in your vehicle, then click it onto the stroller frame adapters when using it as a travel system. Check the car seat is level and secure in the car before your first drive, not just on the stroller.
  5. Add the accessory pack items: Fit the remaining accessory pack pieces, such as the rain cover or footmuff, only after the core stroller, carrycot, and car seat are confirmed secure. Re-check the fold and the storage basket after fitting accessories; bulky items can interfere with the self-standing fold.
  6. Do a full safety and fold check: With the stroller empty, fold and unfold it one-handed, test the self-standing fold, and carry it by the shoulder strap. Load the 8kg basket and confirm it does not tip. Repeat the fold test with the carrycot removed; the stroller should still stand and carry cleanly.

Nia bundle facts that affect setup

Shop Related Products

Nia Compact Travel System with Accessory Pack (12 Piece)

Nia Compact Travel System with Accessory Pack (12 Piece)

$756.00 $1050.00

Shop Now